The Jeneca CDA Series internal submersible water and filter pump line (manufactured by Jin Li Jia Electromechanical / Jeneca) combines water circulation, mechanical filtration, and oxygenation into a single compact unit for aquariums.
Key Features:
Adjustable Flow: Features an integrated flow-regulating valve to control water output.
Dual Pumping Modes: Supports either bottom pumping or side pumping depending on your tank setup.
Multifunction Design: Handles water cycling, debris/waste removal via filter sponge/carbon, and aeration (air bubbles) simultaneously.
Compatibility: Safe and effective for both fresh and saltwater fish tanks.
Energy-Saving & Quiet: Built with specialized energy-efficient motors designed for low noise operation.
Available models:
CDA-200L
Power: 3.5W
Qmax: 280L/H
Hmax: 0.48m
Size: 86x43x150mm
CDA-300
Power: 5.5W
Qmax: 370L/H
Hmax: 0.7m
Size: 94x50x180mm
Essential Usage & Safety Cautions:
Fully Submerged: The pump must always operate completely submerged in water; never run it dry or let it idle.
Power Off First: Always disconnect the power plug before installing, dismantling, or cleaning the unit.
Fixed Cord: The power supply wire cannot be replaced; if the cord is damaged, the pump must be discarded.
Voltage Check: Verify that your local wall voltage matches the rated voltage printed on the pump's nameplate.
SKU: CDA-200L JHCM
