Description
Easi Render is a high quality premixed plaster for plastering on brickworks, lightweight concrete blockworks and concrete surface. It is a cement-based and water resistant plaster which can be used in interior and exterior conditions. It is specially formulated for the replacement of conventional site-mixed cement/sand plaster as well as gypsum plaster. Easi Render can also be used for patching concrete as well as a masonry joint mortar for bed thickness of 4 -10mm. Easi Render should not be used on painted surfaces.
Uses
Interior and exterior cement render for brick walls, block walls and concrete surfaces.
to be applied on smooth concrete surfaces, key coat or roughening of the receiving surface required.
Suitable for patching and repairing concrete.
Usage on painted surfaces or floors is not recommended.
✔️Features & Benefits
Single component: Fixed mixing proportion, ensure the quality of work.
Specific design for spray plastering.
Shrinkage compensated: Reduce the change of shrinkage cracks.
Suitable for tiling with receiving E-MIX Tile Adhesive and Tile Grout series products.
Suitable to receive paint with E-MIX Skim Coat series products.
Compatible to cementitious E-MIX Waterproofing series products.
Convenient: Premixed to replace conventional cement sand render.
✔️Substrate Preparation
Remove loose particles, grease and traces of foreign materials. On a dry absorbent surface, the surface is moistened if necessary.
✔️Mixing & Installation
A suitable mixing time 3-7 minutes depending on the type of mixing equipment. Use the mixture within 1 hour of mixing. Application can be done by hand machine. For smooth final finish, thin plasters are recommended on top of the E-MIX Easi Render..
The water resistance and adhesion of the render can be improved by adding Render Mix. In hot and dry conditions, the plaster should be cured with water spray during the first 2 days..
