HARDEX PU FOAM adalah satu komponen, siap menggunakan busa poliuretana pelbagai guna. Dilengkapi dengan kepala penyesuai plastik untuk digunakan dengan pistol aplikasi busa atau aplikator plastik. Buih akan mengembang dan menyembuhkan dengan kelembapan di udara. Ini digunakan dalam berbagai aplikasi bangunan. Ia mempunyai kemampuan mengisi dan kedap yang sangat baik dengan kapasiti pemasangan yang hebat, penebat haba dan akustik yang tinggi.
🐉Kawasan aplikasi:
- Pemasangan, pemasangan dan penebat bingkai pintu dan tingkap.
- Mengisi dan menutup jurang, sendi, bukaan dan rongga.
- Penyambungan bahan penebat dan pembinaan bumbung.
- Ikatan dan pemasangan.
- Menebat saluran elektrik dan paip air.
- Penebat yang sangat baik untuk panas, sejuk dan bunyi.
- Suhu aplikasi antara 5˚C hingga 35˚C
- Tujuan mengemas, membungkus komoditi yang berharga dan rapuh, tahan goncangan dan anti-tekanan.
HARDEX PU 泡沫是一种单组分、即用型多用途聚氨酯泡沫。 它配有塑料适配器头，可与泡沫喷枪或塑料喷枪一起使用。 泡沫会因空气中的水分膨胀和固化。 它用于广泛的建筑应用。 它具有出色的填充和密封能力，具有出色的安装能力、高隔热和隔音性能。
HARDEX PU FOAM is a one component, ready to use multi-purpose polyurethane foam. It is fitted with a plastic adapter head for use with a foam application gun or a plastic applicator. The foam will expand and cure by moisture in the air. It is used in a wide range of building application. It has excellent filling and sealing capabilities with great mounting capacity, high thermal and acoustical insulation.
🐢Application Area:
- Installing, fixing and insulating of door and window frames.
- Fillingand sealing of gaps, joint, opening and cavities.
- Connecting of insulation materials and roof construction.
- Bonding and mounting.
- Insulating electrical outlets and water pipes.
- Excellent insulation for heat, cold and sound.
- Application temperature is between 5˚C to 35˚C
- Packing purpose, wrapping valuable and fragile commodities, shake-proof and anti-pressure.
🦕Benefits:
- Non-shrink.
- Non-sagging.
- Good filling capacity.
- Good adhesion to a wide variety of surfaces.
- Ozone-friendly propellant (CFC free).
🦖Directions:
1. Surface must be clean and free of dirt, grease or oil.
2. Moisten surfaces with a water sprayer prior to application.
3. Shake the aerosol can for at least 40 seconds.
4. Fit the straw on the adapter. Firmly screw the can on the adapter and turn the flow adjuster screw.
5. Fill the holes and cavities. Bottom up during application.
6. Foam will be tack free in about 10 minutes. Excess can be trimmed within 1 hour.
7. Fresh foam can be removed using acetone. Cured foam can only be removed mechanically.
🦦Safety recommendation:
- Do not beat spray or capor. In case of eye contact, flush
with water and get immediate medical attention.
- Use in well ventilated areas.
- Wear suitable protective clothing, gloves and goggles.
- Keep away from direct sunlight and do not expose to temperature over 50˚C.
- Do not burn or pierce can even after use.
- Keep away from heat, sparks, flames and static electricity.
- Turn off all sources of ignition (pilot light etc.).
Package Included:
1x Hardex HPU-30 PU Foam 475ml
