2-Ton Strong Bond:
Epoxy Fix Super Strong is recommended when a very high bond strength is required. It is 150% stronger than normal super glue tested on metal. This two - component gap filling resin adhesive dries clear to slight yellow colour and provide tough and durable bonds on most materials in common use. (Does not bond polypropylene or polyethtlene) Super Strong sets in approximately 6-8 hour. High bond strength is attained after 3 days.
Directions: 1. Surfaces to be repaired should be clean, dry and free from grease. For best adhesion, scrape and sand the surfaces and clean with acetone.
2. Unscrew caps of each tube and pierce tube seal with reverse end of own cap to avoid contamination.
3. Dispense equal amount of resin and hardener (Parts A & B) onto a clean disposable surface and mix thoroughly. The mixture will remain usable for 3 - 4 minutes.
4. Apply to surface to be repaired and allow to harden.
5. To reseal, wipe nozzles clean and replace caps to original tube (colour coded), or hardening may occur in tube nozzle.
SKU: Unit
