8-16 Week supply
A high-strength blend of BPC-157 and TB-500 – two popular peptides used for healing, mobility and post-training recovery. Delivered in an easy-to-use pre-filled pen.
Each BPC-157 & TB-500 40mg Pen Kit Includes:
1 × Pre-filled injection pen (40mg total: 20mg BPC-157 + 20mg TB-500)
Microfine needles for injection
1 × Patient information leaflet
Flexible Dosing Guide:
- 2.5mg or 5mg every other day
- Each pen contains 4 full doses or 8–16 smaller ones, depending on usage.
Total: 40mg per pen
Use 2–3 times weekly. Store in fridge (2–8°C).
Delivery: Dispatched with a cold pack
Tracked Next-Day UK Delivery.
How to Use Your BPC-157 & TB-500 Injection Pen
Step 1: Wash Your Hands
Thoroughly clean your hands with soap and water to ensure a sterile environment before handling the pen or needle.
Step 2: Prepare the Pen
Remove the pen cap and check the medication. Ensure the solution is clear and free of particles. Select a new needle and peel off the paper tab.
Step 3: Attach the Needle
Align the needle with the top of the pen and twist it on firmly until secure. This ensures a proper seal for safe injection.
Step 4: Prime the Pen
Turn the dose knob to select a small dose (as instructed). Hold the pen upright and press the injection button to release air bubbles and prepare the flow.
Step 5: Select Your Dose
Use the dose knob to select the correct dose as prescribed. Confirm the dose is visible in the dose window.
Step 6: Choose an Injection Site
Recommended areas include the stomach (at least 2 inches away from the belly button), thigh, or back of the upper arm. Rotate injection sites weekly.
Step 7: Inject the Dose
Insert the needle into your skin at a 90-degree angle. Press the injection button fully and hold for 5–10 seconds to ensure the full dose is delivered. Then, carefully remove and discard the needle in a sharps container.
How to Dose
If you're using BPC-157 & TB-500 for the first time, it’s essential to follow a gradual dosing plan to allow your body to adjust and minimize side effects.
Recommended Dosing Schedule:
2.5mg every other day or 5mg every other day
Dose by Clicks (Dial Setting):
2.5mg = 2.5mg on dose window
5mg = 5mg on dose window
How to Store
To maintain effectiveness and safety, always store your Alluvi BPC-157 & TB-500 40mg pen according to the following guidelines:
Before First Use:
Store in the refrigerator at 2°C to 8°C
Keep the pen in its original packaging to protect from light
Do not freeze the pen. If frozen, it must be discarded
After First Use:
You may store the used pen at room temperature (up to 15°C) for up to 4 hours
Keep away from direct heat, sunlight, and moisture
Always replace the pen cap after each use to prevent air exposure or leakage
Do not store with the needle attached
Keep Out of Reach of Children
Tips for Best Use
Make the most of your BPC-157 & TB-500 40mg journey with these simple, effective tips covering usage, dosing, and storage.
Using the Pen
Always prime the pen before the first dose by releasing a small amount into the air.
Use a new needle for every injection to avoid infections and clogged flow.
Inject slowly and hold the button down for at least 5 seconds to ensure full delivery.
Rotate injection sites weekly (stomach, thigh, or back of upper arm) to reduce skin irritation.
Press gently with gauze after injecting, but don’t rub the area.
Dosing Smartly
Start with 2.5mg every other day. Only move to 5mg if needed.
Use the dose window to choose 2.5mg or 5mg.
Keep track of when and how much you take each time.
Storage & Handling
Keep unused pens refrigerated at 2–8°C until needed.
Once opened, you can store the pen at room temperature (max 30°C) but recommend always to store in a fridge, when not in use.
Always recap the pen and remove the needle after each use.
Never reuse needles or store the pen with a needle attached — this can lead to leaks or air entering the pen.
Dispose of used needles in a proper sharps container.
