Wunscher Germay Intake Valve Cleaner W7746 400ml
Throttle and Valve Cleaner removes all types of hard-to-remove deposits from throttle valves, EGR, turbochargers, and fuel injectors without disassembly. Restores the functionality of moving parts and reduces fuel consumption. Excellent penetration properties allow for cleaning hard-to-reach areas in the intake tract without disassembly. Neutral to most plastics, rubber, and automotive paints. This product is suitable for the latest two-stroke and four-stroke engines with a catalyst.
Properties:
Excellent penetration properties
Evaporates quickly and without residue
Dissolves resinous and tar-like residues
Removes oil- and grease-based contaminants
Restores the functionality of all moving parts
Application:
Over time, oil and soot deposits gradually accumulate on the moving parts of throttle valves, turbochargers, and EGR valves, affecting airflow. As a result, engine RPM fluctuates in idle mode, or engine RPM drops slowly without further acceleration. In such cases, the Intake Valve Cleaner acts as a problem solver to restore original performance.
Important Application Notes:
Ensure the engine is at operating temperature.
If there are signs of excessive contamination in the intake manifold, throttle valves, or turbochargers, manual cleaning or disassembly is recommended before treatment.
Do not apply before the mass airflow sensor.
Do not apply before the intercooler.
Do not apply to vehicles where the intercooler is integrated into the inlet manifold.
If excessive knocking or backfire occurs during treatment, pause the application and allow the engine to idle for 3-4 minutes before recommencing treatment. If knocking persists, the intake manifold may have excessive contamination and require manual cleaning.
Throttle / Turbocharger Cleaning for Diesel Vehicles (without disassembly):
Set engine at 1,500 – 1,800 RPM
Apply product directly into the inlet manifold
Spray in 1-2 second intervals, allowing the engine to stabilize in between sprays
After 10 applications, allow the engine to idle for 3 – 4 minutes
Repeat steps 3 and 4 until the contents of the can are consumed
After treatment, carry out an Oil System Clean (Flush) and change the engine oil and filter
Carry out a road test, not exceeding 2,500 RPM for the first 10 minutes
Throttle / Turbocharger Cleaning for Petrol Vehicles (without disassembly):
Set engine at 2,500 – 3,000 RPM
Apply product directly into the inlet manifold
Spray in 4-5 second intervals, allowing the engine to stabilize in between sprays
After 10 applications, allow the engine to idle for 3 – 4 minutes
Repeat steps 3 and 4 until the contents of the can are consumed
Carry out a road test, ensuring full use of RPM range
Available in:
400 ML – Aerosol REF. W7046
(12 btl x 325ml)
SKU: W7046
